德国Titgemeyer大直径环槽铆钉铆接监控系统TIOS® H400-提供完美的装配系统解决方案---上海凯蒂诺工业设备有限公司

该系统适用于大型工业运行。适用于与锁紧螺栓（ø6.5，8和10mm）和高强度铆钉（ø6.5mm），和同步的过程监控。液压单元的功能。液压装置包括一个ø和阀门控制装置。开关柜也房屋的负荷行程监测信号评价放大器。该传感器系统被安装在安装头。SPS控制系统。通信接口（雅迪插头）允许系统的无故障的集成到现有的生产设施。网络连接允许应用过程控制参数的调整，同时提供曲线数据读数。

Hydraulic unit with TIOS® Control
The system is suitable for large-scale industrial operation. Suitable for working with lockbolts (ø 6.5, 8.0 and 10.0 mm) and high-strength blind rivets (ø 6.5 mm), with simultaneous process monitoring. The unit functions hydraulically. The hydraulic unit consists of a pump and a valve-control device. The switchgear cabinet also houses an amplifier for evaluation of the load-stroke monitoring signals. The sensor system is installed inside the setting head. The system is SPS-controlled. A communications interface (Harting plug) permits the trouble-free integration of the system into existing production facilities. An Ethernet connection allows adjustment of the application process control parameters, while providing access to the curve data readings.
There is a choice of two different setting tools, which can be fitted with a pulling head, depending on the type of fastener. Two types of hydraulic unit are available.

Technical data hydraulic units
Type	TIOS® 350	TIOS® 450
Power supply	400/50 Hz	400/50 Hz
Operating voltage	24 V	24 V
Maximum air pressure	350 bar	450 bar
Dimensions	780 x 400 x 660 mm	780 x 400 x 660 mm
Weight	90 kg	90 kg
Communications interface	Harting plug/Ethernet (IP)	Harting plug/Ethernet (IP)
Part No.	385 122 001	385 190 000

Technical data installation tool
	TIOS H350	TIOS H400
Stroke	30 mm	30 mm
Setting load (350/450 bar)	27/34 kN	31/39 kN
Maximum air pressure	350 bar	450 bar
Weight (setting tool)	2.5 kg	3.7 kg
Length (without pulling head and container)	269 mm	315 mm
Width	max. 54 mm	max. 54 mm
Height (without hose)	approx. 230 mm	approx. 230 mm
Hose length	approx. 2.5 m	approx. 2.5 m
Operating capacity	Lockbolts	Lockbolts
	to ø 6.5 mm	to ø 10.0 mm
	High-strength blind	High-strength blind
	rivets up to ø 6.5 mm	rivets up to ø 6.5 mm
Part No.	385 136 000	385 130 000

Pulling heads
For fasteners	for tool model	Nominal-ø[mm]	Pulling head type	Part No.
for lockbolts
SRB Standard	TIOS H35/40	5	99-3003	371 680
	TIOS H35/40	6.5	99-3006	371 705¹
	TIOS H35/40	8	99-99-245	375 885
	TIOS H40	10	99-100-245	375 945
SRB Maxigrip	TIOS H35/40	5	99-1456	372 985
	TIOS H35/40	6.5	99-1477	371 980
	TIOS H35/40	8	99-1439	371 965
	TIOS H40	10	99-1440	371 970
For high-strength blind rivets
M-LOCK / MAGNA-BULB®	TIOS H35/40	5	99-3303	371 805
TIBULB® blind rivet	TIOS H35/40	6.5	99-3305	371 815
¹Special configuration, Part no. 371 705 001