|
铆接范围:可铆接至6.5mm
重量:2.2kg
拉力:22kN@6bar
行程:15mm
高度:315 mm
长度:280mm(不含枪头长度)
Part No.385 060
Installation Tool MS 7
Suitable for handling both lockbolts and high-strength blind rivets.
• The hydropneumatic MS 75 tool is highly versatile when used with the corresponding specified pulling head.
• Compact design and ease of operation ensure the efficient handling of lockbolts measuring up to ø 6.5 mm, Maxigrip lockbolts up to ø 6.5 mm in aluminium and steel, M-LOCK/MAGNA BULB®
blind rivets up to ø 6.5 mm and ø 5.0 mm BOM® blind rivets.
• The pulling heads required for the MS 75 tool are selected in accordance with the type and diameter of the lockbolt and blind rivet being used. Please order separately as required.
Technical data
Maximum operating pressure: 7 bar
Tractive effort: 22 kN at 6 bar
Stroke: ca. 15 mm
Weight (without pulling head): ca. 2.2 kg
Air consumption per operation: 2.8 l
Height: 315 mm
Length (without pulling head): 280 mm
Fasteners |
Nominal-ø [mm] |
Pulling head | Part No. |
for lockbolts | |||
Standard | 5 | 99-3003 | 371 680 |
6.0/6.5 | 99-3006 | 371 705 | |
Multigrip | 5 | 99-1456 | 372 985 |
6.5 | 99-1477 | 371 980 | |
HUCKTAINER PLUS | 10 | 99-3465 | 371 7301 |
for high-strength blind rivets | |||
M-LOCK / MAGNA-BULB® | 5 | 99-3303 | 371 805 |
Blind rivet | 6.5 | 99-3305 | 371 815 |
BOM® Blind rivet | 5 | 99-994 | 372 780 |
TIBULB® Blind rivet | 7.8 | – | 385 150 |
1 The MS 75 requires a special sleeve (Part No. 385 081) which should be ordered separately. | |||
版权所有 Copyright©2010-2013上海凯蒂诺工业设备有限公司 备案号:沪ICP备13010596号-2