|
|
Offset head
• Designed for TIOS® 220, but also suitable for use with other blind-riveting devices
• Tensile force: up to 10 kN
• With suction extraction of rivet mandrel
Technical data
Nose cap diameter: 19.5 mm
Length complete: ca. 160 mm
Weight: ca. 0.8 kg
Part No. 431 837
Rivet mandrel removal device TIOS
• suitable for TIOS® 220
• 4 m hose length
Part No. 431 825
Rivet mandrel removal device MS 40/60/75
• suitable for MS 40/60/75
• 4 m hose length
Part No. 431 826
Threaded elbow joint
• suitable for MS 40. MS 60 and MS 75
• Designed for use in tight spaces; allows the collection container
to be attached at an angle
Part No. 431 701
Long offset head 1A
Small-diameter nosepiece for minimum distances with from edges.
Inserts rivets in the 7-mm range of a right-angled section
Technical data
Operating range: For installation of rivets of all materials from
2.5 – 5.0 mm diameter
Weight: ca. 0.6 kg
Part No. 326 193
Short angled head PRH 840
• Robust 90-degree angled head
• Recommended for use with steel rivets
Technical data
Operating range: For installation of rivets of all materials from
2.4 – 4.8 mm diameter
Weight: ca. 0.5 kg
Part No. 329 257
Special angled head PRH 830
• Very robust 90-degree angled head
• For difficult-to-access applications
Technical data
Operating range: For installation of rivets of all
materials from 2.4 to 3.2 mm
diameter and 4.0 mm diameter
Al-Leg./Cu and closed end blind rivet
3.2 mm diameter of all materials
Weight: ca. 0.5 kg
Part No. 326 186
